Lighting controller (V2.0) uses high-speed 32-bit processor, communicates with the controlling computer via the network interface. It can connect to the next controller forming a larger lighting control system. Through the 8 output channels, DMX output, 4-line serial output or 2-line serial output it can achieve real-time lighting system control. You can also use the SD card or USB interface to read an external video file for playback. This controller can control lighting systems with up to 1360 display units. Master-slave structured connections can form a large scale lighting control system combining up to 100,000 display units.Features of the Lighting controller (V2.0) are as follows:
1.DMX512 Main interface(Data、A、B、GND);
2.Single line serial interface(SD、GND),controls chip WS2811 etc.;
3.2-line serial interface(DA、SK、GND),controls chip MBI6020、MBI6021、MBI6030、MBI6023、MBI6024 etc.;
4.4-line serial interface (DAT、CLK 、LCH、OE、GND), controls chip MBI5024、TB60726、74HC595 etc.;
5.Two (10/100M) Ethernet interfaces, assembles the master and slave control modes;
6.One SD interface, can store media files up to 2 hours long;
7.One USB interface, can connect with USB drive and store media files up to 4GB;
8.One RS485 (RS232) interface, can synchronize with other control systems by serial ports;
9.Functions are set through 4 control buttons;
10.Two line English text display through the LCD panel;
11.Suitable for AC220V.
技术分类Technical Specification | 项目规格Item | 参数Parameter |
产品标识Identification | 规格型号 Model | JM09-0332 |
电气性能Electrical Property | 输入电压Input Voltage | AC220V |
最大功耗 Power Consumption | 20W | |
信号输入 Signal Input
| 控制输入接口 Control Input Interface | (1) SD卡接口,最大支持 32GB SD card interface, supports up to 32GB |
(2) USB接口 USB interface | ||
(3) 以太网接口,支持UDP数据协议 Supports data transmission through Ethernet interface and UDP network protocol | ||
(4) RS485接口 RS485 interface | ||
信号输出 Signal Output | 控制输出接口 Control Output Interface | (1) 8 × DMX512输出,带地址编写和读回 8 x DMX512 outputs, addressable and supports status feedback |
(2) 或选择8×4线串口(或8×2线串口) 8 x DMX512 output, with a choice of 4-line or 2-line serial port | ||
系统功能 System Function | 控制容量 Control Capacity | (1) DMX:8 x 170像素 DMX: 8 x 170 pixels (2) 串口:8 x 300像素 Serial Port: 8 x 300 pixels |
控制功能 Control Function | (1) 播放节目专用文件 Plays media files with special file (2) Mapping映射功能 Mapping projection function (3) DMX地址写入和状态读回 DMX addressable and supports status feedback | |
设置功能 Setting Function | (1) 软件设置 Software Settings (2) 按键+LCD屏幕设置 Button + LCD Display Setting | |
物理性能 Physical Property
| 尺寸(长x宽x高) Size(L*W*H) | |
重量Weight | ||
壳体材料 Housing Material | 镀锌板 Zinc-coated plate | |
工作温度 Operating Temperature | ||
工作湿度 Operating Humidity | 0~90%不凝露 0~90% | |
安全性能Safety | 使用环境 Operating Environment | 室内干燥环境 Indoor |
认证Certificate | CE |
软件名称 Software Name | 软件使用环境 Operation Environment |
LED灯光智能控制软件V1.0 Intelligent LED control software V1.0 | (1) 操作系统Control System Windows98/me/2000/NT/XP/Windows7
(2) 硬体基本配置Basic hardware accessories 处 理 器:赛扬2.4G或者更高。 External processor: 内 存:1G 或更高. Internal capacity: 显 示 卡:32M 显存以上. Display card: 网 卡:100M以上网 Internet: |
系统类别 System | 设备名称 Equipment Name | 参数要求 Parameter |
软件系统 Software | 操作系统 Operation System | Windows XP or Windows 7 |
灯光控制软件 Lighting Control Software | LED灯光智能控制软件V1.0 Intelligent LED control software V1.0 | |
硬件系统 Hardware | 主控电脑 Main Control Computer | 以太网接口,USB接口,最少1G硬盘空间,2GB RAM,Windows系统。 Using the Ethernet interface, USB interface, requires minimum |
恒压电源 Constant Power Supply | 对于低压供电的灯具,提供外置恒压电源 Provide constant power supply to low-voltage lighting fixtures | |
LED灯具 LED Lighting Fixture | 具有和数据分配器相同接口的LED灯具 Same data interface with LED light fixture |